September 20th, 2018 2:54 PM by Jackie A. Graves
found the perfect house, located right near that cool new shopping area and the
best schools. It even has the right number of bathrooms! Swoon.
It's time to sign the paperwork and move in ... or is it?
until now, you’ve likely been blinded by the sparkling granite counters and the
hardwood floors in every room. (Squee!) But before you blindly forge ahead,
you'll want to get a home inspection—and before that, you'll
want to check the house yourself for any red flags that might make an inspector
tell you this particular piece of real estate could be more trouble than it's
worth. Check out these warning signs —and what they may take to fix (brace
1. Sewer issues
to look for: You don’t have to tell us twice
that a sewer issue can quickly turn into a stinky situation. Standing water in
the yard, signs of flooding in the basement, and heaved walkways are telltale
signs of a blockage or break in the underground sewer line that connects
to the sewer main in the front of a home, says Bill Erickson, real
estate agent and national director of National Property Inspections.
The cost: Repairing sewer pipes can cost up to $100 a foot, says Erickson,
citing a recent situation where a disconnected pipe resulted in an estimate for
What to look for: If the home that’s
caught your eye was built before the ‘70s, you might have more than lingering
shag carpet and wood paneling to worry about. Hazardous electrical wiring such
as knob and tube wiringand
aluminum branch circuit wiring are two of the biggest offenders that could put
your home at risk of fire.
extension cords can be a big tipoff that your electrical system is stuck in the
disco era, says Kathleen Kuhn,
president of national home inspection franchise HouseMaster. Another sign is a
lack of ground-fault circuit interrupter (GFCI) circuits near a water source,
such as in the kitchen or bathroom. These are designed to protect you from
electrical shock because they monitor electricity flowing in a circuit and
sense a loss of current.
The cost: If you
need to upgrade the electrical panel to make your system more efficient, expect
to spend about $1,000 to $3,000, depending on your area and the size of
the panel, Kuhn says. Each additional outlet will cost $150-plus each, she
says. Rewiring the home will run about $10,000 and up.
What to look for: Don’t worry about every little
hairline or corner crack, says Erickson, since for the most part they are
caused by normal settling and are relatively easy to repair. But be aware of
cracks that are a quarter-inch wide anywhere on the foundation or horizontal
cracks, which generally result from hydrostatic pressure against the home’s
foundation, says Kuhn.
In fact, this
one is such a big deal that ”usually only flippers, developers, and people
considering demolishing a house will consider a property with foundation damage,” says William
Fastow, associate broker with TTR Sotheby’s International
Realty in Washington, DC.
The cost: Foundation repairs can vary dramatically depending on the cause
and remedy, but rarely is the repair under several thousand dollars, Kuhn says.
A localized repair can possibly be achieved for as little as $1,500 to $5,000,
but varying foundation types and significant or widespread issues can easily
exceed $10,000, especially if excavation is needed.
What to look for: The best way to confirm roof life is
to go up on a ladder to check it out, of course, but there are ways you can
speculate about a faulty roof by staying on solid ground.
on the ceiling could indicate a leaky roof, and freshly painted ceilings could
be a sign that the sellers are attempting to cover up the problem,” warns
Erickson. Also look for excessive vegetation outside, which could be hiding roof damage, as
well as curling, buckling, or missing shingles.
The cost: A new roof can range from $2,000 to $10,000 and up, Erickson
says. You’ll want to note if it’s a single or double roof, as that will
determine the cost. With a single layer of shingles, another can go right over
the first layer; but if it’s a double layer, code requires both layers to be
removed, leaving you to start from scratch.
What to look for: Turn on the faucet to
see if the water pressure is low and to listen for gurgling: Either could
indicate that your house has older galvanized piping or inadequate piping, Kuhn
says. You also should check exposed pipes for signs of corrosion (e.g.,
discoloration and flaking).
If your house
was built between 1978 and 1995, it might have polybutylene water supply pipes,
which were part of a class-action lawsuit in the 2000s that found the pipes
degrade and break down, causing leaks, says Scott Brown, owner of
Brightside Home Inspections in Syracuse, NY.
eventually fail, so homeowners risk flooding their home if they don’t replace
these faulty pipes,” he warns.
The cost: Full replacement with a more modern product like PEX will cost
$5,000 and up, or double that for copper pipes, Brown estimates.